GCRI for Pro/ENGINEER GCRI Download Registration. Thank you for your interest in GCRI. Pro/ENGINEER Wildfire 2.0 is not supported on Solaris AMD 64 bit OS.
From 3DS Import for Pro/ENGINEER is a 3D Studio (.3ds) file import plug-in for Pro/ENGINEER Wildfire. This plug-in gives Pro/ENGINEER Wildfire the ability to import geometric data from 3DS files.
3DS Import for Pro/ENGINEER reads polygon mesh data stored in 3DS files and imports it into Pro/ENGINEER Wildfire. A polygon mesh in a 3DS file is comprised of a set of triangular faces. 3DS Import for Pro/ENGINEER creates trimmed planar surfaces for each triangular face and knits them together to create a body.
If the polygon mesh is closed (i.e. It does not contain boundary edges) then 3DS Import for Pro/ENGINEER will create a closed body feature, otherwise an open surface will be created. 3DS Import for Pro/ENGINEER is very easy to use.
Once installed, it must be loaded into the Pro/ENGINEER Wildfire environment. Follow the simple instructions in the ReadMe document which can be found in the installation folder.
Once loaded, it adds new commands to Pro/ENGINEER Wildfire and a submenu called '3DSImport' to the Pro/ENGINEER menu. The '3DSImport' menu consists of the following commands: * Import - Imports a 3DS file * Help - Displays the 3DS Import for Pro/ENGINEER help file * Register - Registers your copy of 3DS Import for Pro/ENGINEER * About - Displays the 3DS Import for Pro/ENGINEER About box.
Hi Benjamin Sounds a bit strange this as usually everthing works fine. It's worth checking that you are doing everything correctly. These are the steps you should be taking. Make sure you are connected to the internet. Begin the install from the CD 3. During the install a window will appear asking you for the licence file. Click on 'Generate Licence file.'
Provided you are connected to the internet this will be obtained from the PTC Server. You will be asked for your PTC Account username and password to proceed. After a short while you should see the downloaded licence file appear in a small window below the 'Generate Licence file' tab.
5 Click either 'Next' or Continue' once the licence file appears. The intall should then continue. Once installed if all has gone conrrectly you should be able to run the software.
Hope this helps. Let me know how you get on.
Bmw Sat Nav Disk Iso there. Regards Paul.